1. How thick a foam sheet can be cut by an oscillating knife cutter?
AMOR Answer: There are two factors affecting this issue:
1. The types of foam materials are generally divided into three types: EVA, EPS, and EPE. EPE and EPS have low hardness and density, making cutting easier;
2. Type of cutter. AMOR recommends using a high-powered oscillating cutter to cut the foam sheet, which can meet the cutting of EVA foam board with a hardness of 45 ° and a thickness of 50mm.
The standard cutting thickness of the oscillating knife cutter for cutting foam is 40mm. Customers can customize a larger cutting height according to the cutting requirements. The recommended maximum cutting height is not more than 60mm.
foam-sheet-cutter-machine
2. What materials can be cut by oscillating knife cutter cutting?
AMOR Answer: It can cut EVA foam, EPS foam, pearl cotton, honeycomb board, corrugated paper, plastic corrugated board, gray board, white cardboard, film, composite material, leather, cloth, rubber sheet, and foam KT below 60mm. Board and many other materials.
3. How does the oscillating knife cutter realize the automatic cutting of foam boards?
AMOR Answer: Just enter the drawing into the computer and set the corresponding data on the machine. If you purchase our AMOR machinery, we provide professional technicians to install, instruct and train you. Usually, as long as you know how to use CAD, you can learn it in 2 hours, and then you can complete the independent operation.
oscillating-knife-cutter-for-foam-sheet
4. How long is the warranty period for foam board oscillating knife cutting machine?
AMOR Answer: The warranty period of the vibrating knife cutting machine is 12 months (excluding man-made damage, consumables: such as countertops, blades, etc.), lifetime maintenance, free system upgrade; during the warranty period, any quality problems are free to replace or repair No maintenance fee is charged; after the warranty period, parts and components that need to be replaced or repaired only charge the cost of materials and labor.
5. What is the difference between oscillating knife cutting machine and laser cutting machine in cutting foam board?
AMOR Answer: The oscillating knife cutting machine uses a sharp knife to cut through vibration. The advantages are fast cutting speed, clean and sharp cutting, accurate cutting size, no odor, and more environmentally friendly.
The laser cutting machine, although the cutting surface is very good and clean, the cutting speed is full and the efficiency is low. The laser machine also has a lot of maintenance. The laser tube will be hot for a long time, it needs water cooling, and it will produce a pungent odor during the cutting of the foam sheet.
EVA-foam-board-cutting-machine
