How to Make Sealing Gasket with AMOR CNC

We’ll show you how to make the perfect gasket with an AMOR CNC gaket cutting machine.

First, we adopted the AMOR 400W high power oscillating knife tool with a 16° tungsten steel blade installed. The material is 2mm non-asbestos rubber sheet.

01. To optimize the processing graphics (time: 00:20-01:30), we need to set the graphics processing number, direction, starting position and processing sequence in the software “xiao”.

02. Cutting test for the processed material (time: 01:41-04:22), we conducted two tests on the material, and passed the test to adjust the cutting speed, knife depth, extension compensation and tool radius compensation;

03. Cutting and processing graphics for the first time (04:22-05:48). After testing the material, we started cutting the graphics, and the cutting effect was perfect. We measured its cutting size and found that the actual size is 0.1mm worse than the graphic size.

04. How to compensate the tool cutting gap (05:48), we show how to compensate the size of the processing graphics in the software to obtain the best cutting size.